ET1125CR

ET1125CR
The ET1125CR 24-Hour Electronic Time Switches enable a program to be repeated on a daily basis. These time switches provide dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 28 setpoints or events can be preset to automatically repeat. The program can be disabled at any time by placing the time switch in the Manual operating mode. Control buttons provide manual control of each circuit independently, regardless of the operating mode. All models come with two industrial-grade AAA alkaline batteries to provide time keeping and automatic carryover for a minimum of 3 years. The batteries are easily replaced in the field and do not require removing the time switch mechanism or field wiring. Each time switch is housed in a lockable enclosure to protect against vandalism and unauthorized tampering.
  • Model Overview
  • Specifications
  • Resources

Enclosure Options: Standard:             Type 1 Gray Painted Steel

                                                              R-Option: Type 3R Gray Painted Steel

                                                              PD82 Option: Type 3R Gray

                                                              High-Impact UV Resistant

                                                              Polycarbonate Plastic with Clear Cover

Knockouts:                                           Combination 1/2" & 3/4" Knockouts

                                                              Bottom: 2, Left: 1 Right: 1, Back: 1

Input Voltage:                                     120, 208, 240, or 277 VAC 50/60 HZ

Operating Temperature:                     -40°F to 155°F (-40°C to 68°C)

ET1105, ET1125 Models:

N.O. Contact Ratings:                    

Resistive:                                              30 Amps @ 120/240 VAC

Resistive:                                              20 Amps @ 28VDC

Inductive:                                             30 Amps @ 120/240 VAC

Tungsten:                                              5 Amps @ 120/240 VAC

Ballast:                                                 20 Amps @ 120-277 VAC

Motor:                                                   1 HP @ 120 VAC

Motor:                                                   2 HP @ 240 VAC

Product Ratings
cCSAus
CA Title 20 Listed
Circuits: 2
Switch: SPST
Clock Volts AC: 120, 208, 240, 277
AMP Rating: 30
HP Rating: 1HP/2HP
Enclosure: Type 3R

New Product Highlights

IOS-DDR-W

The Intermatic® line of occupancy sensors are engineered and tested for long-lasting performance. In-Wall and Ceiling Mount sensors in both PIR (infrared) and dual (PIR/ultrasonic) technologies can monitor virtually any area within a building, providing solutions for any retrofit or new construction project. They utilize zero-crossing technology to suppress inrush current impact, supplying reliable ON/OFF sensing no matter the lighting technology.

ICUBE

The Intermatic® ICUBE™ Adaptive Defrost Module cuts defrost cycles--and utility bills--for the food service industry. Designed by Grässlin by Intermatic for commercial walk-in coolers and freezers, the smart-sensing technology behind the ICUBE™ continuously monitors evaporator coil temperatures and only allows defrosting when necessary at the next programmed timer interval.


Surge Protective Device Group Shot

The Intermatic® Surge Protective Device with Consumable Modules covers 100% of a home’s big investment equipment, from appliances and computers, to HVAC equipment and TVs. The Surge Protective Device uses replaceable Consumable Modules that allows homeowners to easily and safely replace a module when the built-in LED light indicates it has been compromised.