T100 Series

T101
HVACR

The T100 Series mechanical time switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.

Applications

  • Indoor/outdoor lighting
  • Signs
  • Filters
  • Electric fences
  • Fans
  • Conveyers
  • Pool heaters
  • Blowers
  • Pumps
  • Other electrical loads
  • Series Overview
  • Model Lineup
  • Specifications
  • Accessories
  • Resources
  • Electrical loads up to 40 A
  • Provides direct 24-hour control of most loads
  • 1 to 12 ON/OFF operations each day with minimum ON/OFF times of 1 hour
  • Manual override
  • All models equipped with one ON and one OFF tripper
Product Ratings
cCSAus
UL
ModelEnclosureSwitchClock Motor Volts 60 HzAmpsHP Rating
T101Type 1 Indoor SteelSPST120402
T101BType 1 SteelSPST120402
T101PType 3R PlasticSPST120402
T101PCD82Type 3R Plastic with See-Through CoverSPST120402
T101RType 3R SteelSPST120402
T102Type 1 SteelSPST208-277 405
T102PType 3R PlasticSPST208-277 405
T102RType 3R SteelSPST208-277 405
T103Type 1 SteelDPST120402
T103MMechanism onlyDPST120402
T103PType 3R PlasticDPST120402
T103PCD82Type 3R Plastic with See-Through CoverDPST120402
T103RType 3R SteelDPST120402
T104Type 1 SteelDPST208-277405
T104MMechanism OnlyDPST208-277405
T104PType 3R PlasticDPST208-277405
T104PCD82Type 3R Plastic with See-Through CoverDPST208-277405
T104RType 3R SteelDPST208-277405
T104-50Type 1 SteelDPST208-277 at 50 Hz405
T105Type 1 Steel1 NO/1 NC, can be wired as SPDT120402
T106MMechanism only1 NO/1 NC, can be wired as SPDT208-277405
T106RType 3R Steel1 NO/1 NC, can be wired as SPDT208-277405
T1205RType 3R SteelDPST480405

Enclosures: Type 1 Steel, Type 3R Steel, Type 3R Plastic, Type 3R Plastic with See Through Cover

Switch type: SPST/DPST

Switch ratings:

  • Resistive: 40 A @ varying voltages
  • Inductive: 40 A @ varying voltages
  • Electronic Ballast: 16 A, 277 VAC
  • Tungsten: 40 A @ varying voltages
  • Pilot Duty: 1000 VA @ varying voltages

Motor: 2 HP, 24 FLA @ 120 VAC; 5 HP, 28 FLA @ 240 VAC

Max Power Consumption: 3 W

Operating Temperature: -40° F to 130° F (-40° C to 54° C)

Enclosure Dimensions H x W x D

  • Metal Indoor: 7 7/8" x 5 1/8" x 3 7/16" (200 mm x 130.2 mm x 87.3 mm)
  • Metal Indoor/Outdoor: 10 1/8" x 6 1/2" x 3 5/8" (257.2 mm x 165.1 mm x 92.1 mm)
  • Plastic Indoor/Outdoor: 10" x 6 1/2" x 4" (254 mm x 165.1 mm x 101.6 mm)

Knockout Dimensions:

  • Side/Back: (1) 1/2" and 3/4" combination
  • Bottom: (2) 1/2 and 3/4" combination

Wire Size: #8 - #14 AWG

Warranty: 1-year

  • T101
  • T101B
  • T101P
  • T101PCD82
  • T101R
  • T102
  • T102P
  • T102R
  • T103
  • T103M
  • T103P
  • T103PCD82
  • T103R
  • T104
  • T104M
  • T104P
  • T104PCD82
  • T104R
  • T105
  • T106M
  • T106R
  • T1205R

T101

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T101B

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T101P

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T101PCD82

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T101R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T102

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T102P

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T102R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T103

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T103M

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T103P

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T103PCD82

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T103R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T104

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T104M

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T104P

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T104PCD82

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T104R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T105

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches

T106M

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T106R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1205R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

New Product Highlights

IOS-DDR-W

The Intermatic® line of occupancy sensors are engineered and tested for long-lasting performance. In-Wall and Ceiling Mount sensors in both PIR (infrared) and dual (PIR/ultrasonic) technologies can monitor virtually any area within a building, providing solutions for any retrofit or new construction project. They utilize zero-crossing technology to suppress inrush current impact, supplying reliable ON/OFF sensing no matter the lighting technology.

ICUBE

The Intermatic® ICUBE™ Adaptive Defrost Module cuts defrost cycles--and utility bills--for the food service industry. Designed by Grässlin by Intermatic for commercial walk-in coolers and freezers, the smart-sensing technology behind the ICUBE™ continuously monitors evaporator coil temperatures and only allows defrosting when necessary at the next programmed timer interval.


Surge Protective Device Group Shot

The Intermatic® Surge Protective Device with Consumable Modules covers 100% of a home’s big investment equipment, from appliances and computers, to HVAC equipment and TVs. The Surge Protective Device uses replaceable Consumable Modules that allows homeowners to easily and safely replace a module when the built-in LED light indicates it has been compromised.