T1900, T1970 Series

T1905
HVACR

The T1900 and T1970 Series Electromechanical Time Switches provide up to 96 operations (48 ON/48 OFF) every 24 hours, with minimum ON/OFF times of 15 minutes. These time switches are ideal in areas where shorter duration ON/OFF times are required.

  • Series Overview
  • Model Lineup
  • Specifications
  • Accessories
  • Resources
• Provides up to 96 operations (48 ON/48 OFF) every 24 hours
• Skipper models provide 80 operations daily, and can be omitted on selected day(s) of the week
• 15 minute intervals
• Trippers slide in and out of dial for fast, accurate setting
Product Ratings
cCSAus
ModelEnclosureSwitchInput Voltage 60 HzSkipper Wheel
T1905Type 1 IndoorSPDT125No
T1905PType 3R PlasticSPDT125No
T1905E Type 1 IndoorSPDT480 VACNo
T1906T1906Single Pole Double Throw (SPDT)208-277No
T1975Type 1 IndoorSPDT125Yes
T1975RType 3R OutdoorSPDT125Yes
T1975EType 1 IndoorSPDT480Yes
T1975EType 3R OutdoorSPDT480Yes
T1976Type 1 IndoorSPDT208-277Yes
T1976Type 3R OutdoorSPDT208-277Yes

Enclosure:
Type 1 Steel, Type 3R Steel, Type 3R Plastic

Contact Ratings:
20 Amp; 125, 208-277 and 480 VAC; ½ HP, 125 VAC; 1 HP 250 VAC

Power Input:
5 Watts max (sheet says power consumption 3 Watts Max)

Warranty:
1-year, limited                        

  • T1905
  • T1905P
  • T1905E
  • T1906
  • T1975
  • T1975R
  • T1975E
  • T1975ER
  • T1976
  • T1976R

T1905

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1905P

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1905E

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom

T1906

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2485GA
The 2T2485GA steel indoor/outdoor enclosures protect time switches from rain, sleet, snow, and ice. It features 0.36 in. heavy-duty construction with a side-hinged door and a hasp for locking the enclosure. The enclosure has convenient mounting holes and combination ½ inch - ¾ inch nominal knockouts on back, sides, and bottom.
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1975

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1975R

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1975E

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1975ER

2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1976

2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

T1976R

2T2040GA
  • Type 1 Rated
  • Drawn steel with gray powder coat paint finish
  • Hasp (with hole for seal or lock) holds permanently attached hinged door closed
  • Combination  ½ inch - ¾ inch nominal knockouts, one on back and on each side, and two on bottom
  • Convenient mounting holes
2T511GA
  • Type 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray or beige powder coat paint
  • 0.036 inch heavy-duty construction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2293GA
  • NEMA 3R Rated
  • For protecting time switch from rain, sleet, snow and ice
  • Drawn steel with gray powder coat paint
  • 0.036 inch heavy-duty contstruction with side-hinged door
  • Hasp provided for lock
  • Combination ½ inch - ¾ inch nominal knockouts: one on back and each side of enclosure, and two on the bottom
  • Separate grounding terminal
  • Convenient mounting holes
2T2500GA
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
2T2502GA
The Intermatic 2T2502GA beige plastic indoor/outdoor enclosure is a Type 3R rated. The heavy-duty industrial grade plastic enclosure is rainproof, making it ideal for applications located in high humidity and dust environments.
2T2926A
  • Type 3R Rated
  • Made of heavy-duty industrial grade plastic
  • Rainproof all-plastic enclosure is perfect for applications where high humidity and/or dust can be a problem
  • Plastic enclosure has combination ½ inch - ¾ inch nominal knockouts, one on back and on each side of enclosure, and two on the bottom
T10000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T21000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T30000R5
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
T40000R
This enclosures accepts any combination of P1353ME, P4243ME, T100M, and PF1000M Series mechanisms.
Flushmount Enclosure
  • Type 1 Rated
  • For concealing mechanism in wall and giving a finished, flush appearance
  • Heavy-duty, formed steel construction with hinged door
  • Gray finish with powder coat paint
  • Convenient mounting holes
  • Cutout 9 1⁄8 inches H x 6 inches W x 4 1⁄8 inches D; flange 11 x 8 inches
22T338GR
  • Ideal for panel mounting of mechanical or electronic time switch controls, alongside of other DIN rail mountable electrical devices
  • Snap-in type bracket accepts a wide range of Intermatic time switches including T100, T170, T1900, T2000, C8800, ET1100, ET1700, ET8000, ET70000, and ET90000 Series Time Switches.

New Product Highlights

IOS-DDR-W

The Intermatic® line of occupancy sensors are engineered and tested for long-lasting performance. In-Wall and Ceiling Mount sensors in both PIR (infrared) and dual (PIR/ultrasonic) technologies can monitor virtually any area within a building, providing solutions for any retrofit or new construction project. They utilize zero-crossing technology to suppress inrush current impact, supplying reliable ON/OFF sensing no matter the lighting technology.

ICUBE

The Intermatic® ICUBE™ Adaptive Defrost Module cuts defrost cycles--and utility bills--for the food service industry. Designed by Grässlin by Intermatic for commercial walk-in coolers and freezers, the smart-sensing technology behind the ICUBE™ continuously monitors evaporator coil temperatures and only allows defrosting when necessary at the next programmed timer interval.


Surge Protective Device Group Shot

The Intermatic® Surge Protective Device with Consumable Modules covers 100% of a home’s big investment equipment, from appliances and computers, to HVAC equipment and TVs. The Surge Protective Device uses replaceable Consumable Modules that allows homeowners to easily and safely replace a module when the built-in LED light indicates it has been compromised.